A pull tarp kit for your dump trailer, cut to your trailer’s inside width and delivered to your door anywhere in the USA. From US$995 delivered, with freight, duties and taxes included.
Will it fit my dump trailer?
The kit fits trailers from 59¼ to 106¼ inches wide inside. Most 6 ft and 7 ft wide dump trailers fall inside that range. A 5 ft wide trailer sits close to the minimum, so measure it carefully.
Measure across the top at the front of the bed, from the inside face of one side wall to the inside face of the other, to the nearest quarter inch. That is the width you enter when you order. Our 2-minute measuring guide shows exactly where to measure. If your trailer has side extensions, or is a different width at the front and back, send us your trailer details and we will confirm the fit before you order.
How it works on a trailer
The tarp sits on a spring-loaded roller inside an aluminum housing at the front of the bed. Pull it back over your load and tie it off at the rear. Let it go and the spring winds it back into the housing.
There is no motor, no wiring and no battery, so there is nothing to wire back to your tow vehicle and no electrics to fail. Hook up, load, pull the tarp and go.
What comes in the kit
- Aluminum housing with the spring-loaded roller
- Heavy-duty mesh tarp with reinforced edges, 16 ft 5 in or 23 ft long
- Galvanized end plates, pull tube, mounting brackets, pull rope and all fasteners
- Step-by-step installation guide
Prices
| Tarp length | Price, delivered to the USA |
|---|---|
| 16 ft 5 in (5 m) | US$995 |
| 23 ft (7 m) | US$1,095 |
Prices include freight, duties and taxes, with no surprise fees on delivery. Once shipped, your kit arrives in 3–7 days. Every kit comes with a 12-month parts warranty.
Choosing your tarp length
Measure the inside length of your trailer bed, from the front wall to the tailgate. The tarp has to reach from the housing at the front, over the whole load, to the rear with enough left to tie it off, so it needs to be longer than your bed. If you are not sure which length suits your trailer, send us the measurement and we will tell you.
Eyelets for tie-down (optional)
Eyelets are metal rings set into the reinforced edge of the tarp. If you want them, check the Eyelets box when you order and enter the spacing in inches (4 to 118 in). Measure the gap between the rope hooks or tie-down points on your trailer so the eyelets line up with them.
Ready to order?
Enter your trailer’s inside width, choose your tarp length, add eyelets if you want them, and pay online in US dollars. From US$995 delivered, duties and taxes included.
Installing the kit
You can bolt the kit on yourself with basic tools, or have your local truck or trailer shop install it. Follow the step-by-step installation guide, which you can also download as a PDF.
Questions
Does it suit landscape trailers?
Yes, as long as the inside width of the bed is between 59¼ and 106¼ inches. The same kit suits dump trucks, dump trailers, landscape trucks and hook-lift bins.
Manual or electric?
This is a manual pull tarp: no motor, wiring or battery. If you are weighing it up against an electric system, read manual pull tarp vs electric tarp system.
Are there any extra charges on delivery?
No. The price you pay online includes freight, duties and taxes.
Who are you?
Fragar Group is an Australian manufacturer of truck and trailer tarp systems. Our team is in Australia and replies during business hours (Sydney time). Message us on WhatsApp or email sales@fragargroup.com.au.