Pull-Out Tarp Spare Parts
Replacement componentry for our alloy pull-out tarp system. Every part below is numbered, priced and held in stock, so you can order what you need without waiting on a quote.
-
Aluminium Housing
FG-PT-AH08 $290.00 ex GST200 × 200 mm full-length aluminium cover that protects the tarp when stowed. Cut to your required length at no extra charge. -
End Plate — Left Hand
FG-PT-EPLH06 $15.00 ex GSTCast alloy end plate for the pull-out tarp housing. Carries the roller assembly at the driver's side. -
End Plate — Right Hand
FG-PT-EPRH07 $15.00 ex GSTCast alloy end plate for the pull-out tarp housing. Carries the roller assembly at the kerb side. -
Fastener Kit
FG-PT-FK11 $25.00 ex GSTBolts, nuts and washers to suit a standard pull-out tarp fitment. -
Keder / Welt Cord
FG-PT-WC03 $20.00 ex GSTReplacement welt cord for re-roping a tarp into the roller tube channel. Sold by the metre. -
Keder Roller Tube
FG-PT-KRT02 $40.00 ex GST63 mm OD aluminium extrusion with an integral keder channel that carries the tarp's welted edge. Cut to your required length at no extra charge. -
Keder Tube Plastic End Cap
FG-PT-KTPEC14 $8.00 ex GSTMoulded plastic end cap that plugs into the 63 mm keder roller tube. Slotted to clear the keder channel, with a central boss for the spindle. Sold in pairs. -
Keder Tube Plastic Internal Spacer
FG-PT-KTPIS15 $5.00 ex GSTMoulded plastic spacer that sits inside the 63 mm keder roller tube. Supports the tube wall, keeps the spring rod running true, and stops the tube deflecting over long spans. -
Mesh Tarp — Replacement 5000 mm
FG-PTM01-5000 $280.00 ex GSTMesh tarp with a reinforced pocket for the pull tube. Made to your required width at no extra charge.
-
Mesh Tarp — Replacement 7000 mm
FG-PTM01-7000 $410.00 ex GSTMesh tarp with a reinforced pocket for the pull tube. Made to your required width at no extra charge.
-
Mounting Bracket — L
FG-PT-MBL09 $40.00 ex GSTAlloy L-bracket for mounting the tarp housing to the body rail. Sold in pairs. -
Pull Tube
FG-PT-PP04 $34.00 ex GSTThe operator's end bar that seats into the tarp's reinforced pocket. Cut to your required length at no extra charge. -
Pull Tube Guide Cap
FG-PT-PTGC12 Price range: $30.00 through $35.00 ex GSTMoulded plastic cap that fits the end of the pull tube and guides the tarp as it runs in and out. Sold in pairs. Suits 25 mm outside diameter pole.Select options This product has multiple variants. The options may be chosen on the product page -
Rope Tie-Off Cleat
FG-PT-RTOC16 Price range: $16.00 through $21.00 ex GSTMoulded plastic cleat for tying off the tarp rope. Two-hole fixing, mounts to the body side. Sold in packs of four.Select options This product has multiple variants. The options may be chosen on the product page -
Shark Fin Retainer
FG-PT-SFR13 Price range: $30.00 through $35.00 ex GSTAlloy shark fin that holds the pull tarp back when stowed. Mounts to the body rail with two bolts. Sold in pairs.Select options This product has multiple variants. The options may be chosen on the product page -
Spring Assembly Mechanism
FG-PT-SAM05 $260.00 ex GSTConstant-tension spring cartridge for the pull-out tarp system. The most commonly replaced component on high-cycle trucks. Made to any size to suit your body. -
Support Bracket
FG-PT-MBSB10 $40.00 ex GSTAlloy support bracket for mounting the tarp housing to the body rail. Sold in pairs.
All prices in AUD, excluding GST. Freight calculated at checkout.
Can’t find the part you need?
We also stock parts for retractable (front to back) tarps and hungry boards. For electric drives or anything not listed here, email a photo of the part and your truck details to sales@fragargroup.com.au or call 1300 850 413, and we’ll help you track it down.
Tarp worn out? We make replacement tarps, so you don’t need a whole new system.